Air Conditioning - Commerical and Industrial San Francisco CA

Air conditioning is maintaining the thermal temperatures of a room artificially through aiding equipment in such a way that the occupants are comfortable in the surrounding environment. Both commercial and industrial air conditioners strive to maintain temperate air conditions that are neither too cold nor too hot. Factors determining the thermal conditions of a room or any other enclosed place include the air temperature, humidity, clothing, activity levels, clothing and the level of air circulation in the house. The material used in the construction of the room is also a major determining factor.

The need to regulate room temperatures has been a consistent human need since medieval times. Architects in earlier human history would for example incorporate water ducts in the walls of particular buildings. Depending on the weather, people would circulate hot or cold water through the ducts to either cool or warm the room interiors. Innovations that are more practical led to the adoption of wind towers and cisterns as more efficient cooling equipments. Today however, equipments that are more sophisticated are in use both industrial and commercial air conditioning.

An air conditioner refers to any equipment that is used to diffuse the impurities contained in the air in a particular room. The equipment varies in size and function and buyers of such equipment make their choices depending on their air conditioning needs. Rooms that are huge and need more air regulation requires higher capacity air conditioners, alternatively, one can install several air conditioners within a room to acquire the desired room temperatures.

Almost all commercial and industrial buildings require air conditioning. Apart from regulating air temperatures, the equipment are necessary to regulate the humidity levels in the air and freshen the air especially in industrial settings where the different chemical process emit bad smelling gases. The most widely used form of air conditioning methods are ventilations and windows. However, congested areas, or rooms that have a lot of human activity needs some form of complementary air conditioners, which circulates air and sucks fresh air from the atmosphere, which it infuses into the rooms.

Air conditioners are commonly mounted on the exterior of building wall’s and fresh air infused into the room interiors using an extension compartment. Domestic air conditioners are however small and portable from one position in the building to another.

Air coolers in commercial and industrial settings can take the form of wall ventilation and windows, or can be in more technologically enhanced equipment. A good example is the evaporative cooler, which people use to maintain thermal temperatures during hot weather seasons. The working mechanism in an evaporative cooler draws fresh air from the atmosphere, sucked through a wet pad. The wet pad cools the air before it finally pumping it in the building. Hospitals use a more complex form of air coolers that pass the warm air in a three stage-cooler. The three stages removes humidity from the air cools it and removes any airborne organisms.