How To Minimize Your Braking Distances Crossville TN

1. Brake fluid check: Your must properly maintain your car safety systems. The most important of these is the brakes. Check the brake fluid every time you change the oil or open the hood. Most cars use DOT3 or DOT4 brake fluids, which are specially made to resist compression. If your brake fluid level is low, use only new fluid. Never use an old bottle of brake fluid.
   
   
2. Tire pressure: You've heard it before, but it's pretty important to have the right amount of pressure in all four of your tires. Under-inflated tires make for poor fuel efficiency, poor handling, and increased braking distances. It's just as bad to drive with over-inflated tires. Too much pressure causes the tire to bulge, and you won't ride on the whole width of the tire. This also increases braking distance and impedes performance. Check your owner's manual or read the sticker on the side of the driver's-side door when it is opened. Either should indicate proper tire pressures for both front and rear tires.
   
   
3. Anti-lock brake techniques: Many cars manufactured in the past ten or fifteen years are equipped with ABS or Anti-lock brake systems. Anti-lock brakes are designed to improve handling while braking, and they reduce braking distance under most conditions. They turn on when you push the brake pedal hard towards the floor. In an emergency braking situation, you should press the brake pedal firmly towards the floor and steer around obstacles as needed. Do not reduce pressure on the pedal, and do not "pump" the brakes to prevent skidding.
   
   You should feel the pedal pulsing while the ABS is engaged. This is normal, and should not be a cause for concern. The ABS system will prevent the tires from locking up and prevent subsequent loss of control. This may give you enough time to steer around an obstacle or stop before reaching it. You should make small, controlled steering changes.
   
   ...

Click here to read the rest of the article at HowToDoThings.com

Author: Joshua Murphy