How to Build a Kitchen Table Albuquerque NM

Here are the steps and details for building your own table, from the tools you need to the instructions on how to do it.

Local Companies

Wayne Scheiner & Company Inc
505-256-9224
212 Bryn Mawr DR NE
Albuquerque, NM
Albuquerque
(505) 349-8604
1797 Silver Ave SE
Alburquerque, NM
Kamazar Multimedia Production
505-265-6422
4931 Prospect Ave NE
Albuquerque, NM
Lobo Internet Services LTD
505-830-1012
2419 San Pedro Dr NE
Albuquerque, NM
Verde Studios
505-348-9777
2400 Louisiana Blvd NE
Albuquerque, NM
Zocoloco Studios
505-345-3994
2133 Ryan Pl NW
Albuquerque, NM
HAUL IT ALL SERVICES
(505)553-5545
2nd street
Albuquerque, NM
HAUL IT ALL SERVICES,Commercial/Residential Junk Removal
505-553-5545
2nd Street
Albuquerque, NM
Sun Comm Digital Satellite
505-830-3474
4815 Hawkins NE Ste A-2
Albuquerque, NM
Southwest Communication System
505-341-0011
6808 Academy Parkway E NE Suite A-5
Albuquerque, NM

Provided By:

Steps

  1. You need 4 pieces of wood 30 inches (762mm) long and 2" by 2" (around 50mm X 50mm).
  2. Get a piece of wood measuring 60 in. x 84 in. x 3/4 inches thick (610mm X 610mm X 19mm) for the table top.
  3. Sand wood with light sandpaper until all the edges are smooth and flat.
  4. Buy 8 L-shaped metal brackets 2 inches (50mm) long on each branch of the "L."
  5. Get a package of 1-1/2-inch-long (38mm), size 8 wood screws.
  6. Position the bracket at the end of the leg, so that the bend of the bracket is flush with the end of the piece of wood. If the wood is very hard, mark and predrill the holes where the screws will go. The drilled holes should only be the diameter of the solid metal at the bottom of the screw thread. Only drill deep enough to get the screw well started. Screw a bracket onto each leg.
  7. Rotate the leg 90 degrees and screw in a second bracket. Repeat with each leg.
  8. Get some screws 1/4 (6mm) to 1/2 inch (12mm) shorter than the thickness of the tabletop.
  9. Put the tabletop on the floor with the top facing down.
  10. Place a table leg, bracket end down, on the tabletop's corner.
  11. Line up the edge of the leg with the edge of the tabletop.
  12. Hold the bracket down on the tabletop and screw one of the screws through the hole in the bracket.
  13. Screw the other bracket into the tabletop.
  14. Repeat with all four legs.
  15. Turn the table over.
  16. Shake the table to check for motion. If there is motion, sink two long screws through the tabletop into the top of each leg, or replace the brackets with longer, thicker ones.
  17. Paint or stain the table a color of your choice.
  18. Let it dry overnight before using it.

Tips

  • Make sure all the 4 pieces of wood are the same length before starting.
  • Make sure the screws attaching to the tabletop are not too long.
  • Be sure that the stock selected for the table top is planed to the exact same thickness.

Article provided by wikiHow, a wiki how-to manual. Please edit this article and find author credits at the original wikiHow article on How to How to Build a Kitchen Table. All content on wikiHow can be shared under a Creative Commons license.

Featured Local Company

Wayne Scheiner & Company Inc

505-256-9224
212 Bryn Mawr DR NE
Albuquerque, NM
http://www.scheiner.com


Rss   Delicious   Digg   Add To My Yahoo   Add To My Google   Bookmark   Search Plugin

Topics:
Advertising Family Home Services Real Estate Resources
Business Services Fashion Industrial Goods & Services Retail & Consumer Services
Career Financial Services Insurance Software
Cars Food & Beverage Internet Technology
Computer Hardware Franchise Legal Telecommunications
Construction Health Miscellaneous Trade Shows
Education Holidays Nightlife Travel
Entertainment Home Appliances Online Database Weddings
Environmental Home Electronics Pets World History