How to Install a Garbage Disposal Brooklyn NY

Garbage disposals are units that help in getting rid of waste products in the kitchen. Traditionally, we fill trash bags with the rotten food and throw the bag is the garbage. But installing a garbage disposal can help you save on garbage bags. Garbage disposals help prevent the sink from getting clogged by small debris that enters into the pipes.

If you already have a garbage disposal kit installed in your kitchen, disconnect the electrical supply to it. Go to the panel and pull out the wire safely. Disconnect the pipes under the sink that connect the garbage disposal. Loosen the disposal unit and take out the strainer, then apply some putty around the strainer with the help of a putty knife. Now make sure that the sink opening is properly cleaned of any leftover putty. Now place the new disposal sink flange into the opening. Tighten the strainer bolts. Now connect the electrical wire on to the disposal unit by hooking it on to the flange. Check the drain hole just to make sure that everything is installed properly and for any leaks.

There are different kinds of garbage disposals on the market. Choose a garbage disposal with a sturdy motor, at least 1/2 horse power. A less powerful one will clog easily and will need replacing after a few years. High quality models of garbage disposals have stainless-steel interior parts, an anti-jam feature, and plenty of insulation to keep noise down. The fatter the unit is, the quieter it's likely to be. A good garbage disposal costs anywhere from $80 to $250; anything cheaper is not worth buying.

There are two types of disposals - continuous and batch-feed. Continuous-feed models are activated by a wall switch. Batch-feed models start when you turn the lid. Batch-feed types are quieter and safer, because they can't be run unless the lid is in place. The mechanism also prevents silverware from falling into the running disposal. However they are less convenient as you can't simply drop food in and flick a switch, and they come with fewer options.

A disposal should have its own 120-volt electrical circuit. The connection can be either plug-in or hard wired, though some communities require hard wired. Check your local codes before you do anything-some building codes prohibit the use of disposals, while others require them.

Click here to visit HowToDoThings.com