Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: March 1, 2007
By MASONRY CONSTRUCTION Staff
System reduces worker requirementsThe EZ Beaver bracing system reduces the number of workers needed, while setting and stripping twice the foundations and additions. Stakes are driven into solid ground 6-in. back from the footings, which ensure more stability. The wide plate allows two adjoining forms to be set flush and secure, eliminating the need for toe nailing.
Trussing and bracing save timeThe Racker trussing and bracing system reduces time-consuming measurements and serves as top and bottom chord bracing, as well as permanent lateral bracing. The system is pre-notched for accurate spacing (24-in. or 16-in. on-center). This approach eliminates the need for measurements, spacer blocks, and other systems. It can be used on masonry, as well as wood-frame structures.
Product used single-side or back-to-backThe Adjust-It bracing system is used for single-side or back-to-back arrangements to support the construction of masonry walls. In single-side applications, it can be used as a pipe brace, with above- or below-ground deadweights on CMU walls up to 27-ft high. The back-to-back setup uses a through-bolt that ensures the braces are opposite each other.
Click here to read full article from Masonry Construction